Canon FD infrared lenses.

3 lensesGood 3Maybe 0Bad 0

Use an adapter to mount these lenses to many mirrorless cameras.

Data credit: these ratings come from the remarkable research at irlensdb.com, a community-built resource that has tested and documented more infrared lenses than any other reference online. I have stripped the retailer links and reformatted the data, but the hard work of collecting it belongs to them.

Ratings describe how a lens behaves on an infrared-converted camera. A maybe lens is usually fine wide open and shows a hot spot as you stop down, so check the notes before you write one off.

Lenses (3)

  • Canon New FD 24mm ƒ/2.8

    Good
    Focal
    24mm
    Aperture
    ƒ/2.8
    Filter
    ⌀52mm

    Tested by Rob

  • Canon FD 50mm ƒ/1.4

    Good
    Focal
    50mm
    Aperture
    ƒ/1.4
    Filter
    ⌀52mm

    Tested by Rob

  • Canon FD 50mm ƒ/1.8

    Good
    Focal
    50mm
    Aperture
    ƒ/1.8
    Filter
    ⌀55mm

    Tested by Rob

Next step

Ready to shoot infrared on Canon FD?

Pick a clean lens from the list, then get the body converted and the filter to match. Kolari Vision handled my own conversions and makes the clip-in and screw-on filters I use.

Links to Kolari Vision are affiliate links: if you buy through them the site earns a commission at no extra cost to you. They are the shop my own conversions and filters came from, and the recommendation would be the same without the program — full disclosure.

Links to Kolari Vision are affiliate links: if you buy through them the site earns a commission at no extra cost to you. They are the shop my own conversions and filters came from, and the recommendation would be the same without the program — full disclosure.

Other full frame mounts

All mounts in the database →

Related guides

Where this data comes from

These ratings are compiled from the community-maintained Infrared Lens Database, with contributor credits kept in the notes. Ratings are submitted by photographers using different conversions, so results vary by wavelength, aperture and individual lens copy — treat them as a strong starting point, not a guarantee. Retailer links from the source have been removed. If you have tested a lens, contribute your result back to the original database so everyone benefits.